CHP COMMISSIONING SERVICES

GENERATORS WITH MINIMAL DOWNTIME

WBPS provide complete generator commissioning service throughout the UK. Install your generator with minimal downtime and expense.

CHP COMMISSIONING SERVICES WHICH GIVE YOU PEACE OF MIND

Our expertise in CHP generator commissioning packages is unrivalled. Experience in the CHP process has made us fully aware that the principal financial benefits are only apparent while the CHP arrangement is running continually. Therefore, our primary aim of all CHP generator commissioning projects is to keep down time to an absolute minimum. During the commissioning process, our engineers will endeavour to identify anything that could cause service interruption after the set has been working for some time. We’ll take action reduce the possibility of future failures during the commissioning process too.

THE CHP COMMISSIONING PROCESS

Generator commissioning is the process of bringing a generator set online and ensuring it is operating correctly. This process can sometimes be complex, as it involves mechanical equipment, fuel and storage tanks and (often) civil works as well. In CHP installation projects, the complexities are often even greater as the system needs to be powered up to provide heat as well as electrical power. In our commissioning service we take care of installing the generator itself, transmission and distribution lines, switchgear, and other necessary equipment.

We then carry out extensive testing to ensure that it is generating heat and power within the specified parameters. Testing can involve including load testing, thermal imaging, and vibrational analysis. We also often test sound attenuation and fuel efficiency. Once the generator has been tested and is operating correctly, it can be put into service safely. As well as working through our in-house testing checklist, we’ll also be using our unbeatable experience to look for the non-obvious faults and potential problem areas that others may miss.

HANDOVER

The handover stage is the process of transferring a generator from WBPS to the client. It takes place after commissioning. In the handover, all relevant information about the generator is passed on to the new owner. This includes information such as the operating instructions, maintenance history, safety parameters, fault finding and troubleshooting.

At WB Power Services we are committed to providing support to our clients even long after the commissioning and handover process has been completed. It’s our mission to ensure that our generators operate with the utmost safety and reliability.

WHAT CAN YOU EXPECT?

Whatever the project requirements, we can implement a solution into your current business process with minimal disruption to the daily running of your site. It means throughout the project, you can expect:

  • One expert team with a single point of contact
  • A process managed by specialists
  • Everyone is employed by us – saving you the cost and time of people management
  • Quality, schedules and budgets overseen by your own project manager
  • A streamlined, transparent process from start to finish

CHP GENERATOR MAINTENANCE

WBPS were instrumental in early testing of alternative fuelled engines for a major worldwide engine manufacturer and have even recently carried out alternative fuel trials for a major utility company. Due to this innovation and knowledge of CHP systems, we can also offer the following products and services.

Find Out More CHP EMERGENCY RESPONSE

We know it is imperative to have consistent power at your business, regardless of time of the night or day of the week. For those occasions where your CHP system fails, we offer a CHP emergency response service to get your system up and running again as fast as possible. Whether you need a temporary power solution, diagnosis of CHP problem, or replacement components for the system, we can help.

FIND OUT MORE
Find Out More CHP GENERATOR COMMISSIONING

Our expertise in CHP generator commissioning packages is unrivalled. Experience in the CHP process has made us fully aware that the principal financial benefits are only apparent while the CHP arrangement is running continually. Therefore, our primary aim of all CHP generator commissioning projects is to keep down time to an absolute minimum. During the commissioning process, our engineers will endeavour to identify any systems that may cause service interruption after the set has been working for a period of time. Action will be taken to help reduce the possibility of future failures during the commissioning too.

FIND OUT MORE
Find Out More CHP SITE SURVEYS

With over 30 years of experience within the alternative fuel and Combined Heat and Power (CHP) market place, we can offer complete CHP site surveys and test to help meet your energy needs. With experience of many different heat recovery systems, we can provide a comprehensive site survey process with subsequent installation and generator maintenance services. The company is fully versed in working with a variety of different fuels, including; natural gas, landfill and sewage gasses, well-head gas and bio diesel. We already have all the necessary expertise to complete a site survey and make recommendations on the correct type of CHP set-up that will be the most efficient model for the intended application.

FIND OUT MORE
Find Out More CHP FAULT ANALYSIS

Our expertise in CHP packages means our experienced technicians can help you with your CHP fault analysis. Typically used as back-up systems, CHP systems can be designed to continue to operate and serve essential loads during an interruption to mains power, this increases the security of energy supplies, meaning that essential services – heat, light and power, etc., remain fully operational during a power cut. Because of their importance in an emergency situation, it is vital that proper fault analysis is available at all times. With our experience, you can be assured that we can carry out CHP fault analysis to help prevent prolonged downtime.

FIND OUT MORE
Find Out More CHP CONTROL UPGRADES

As technology advances in the CHP industry, it will become necessary over a period of time for a CHP package to undergo a control upgrade. This will help to maximise the efficiency of the CHP set-up and guard against possible future failure. Here at WB Power Services, our team keep firmly abreast with modern advances in CHP control upgrades and power generation and has the resources to ensure that any future upgrades are kept in line with new improvements.

FIND OUT MORE
Find Out More CHP Load Bank Testing

Load bank testing is a process that is used to test the performance of generators and other electrical equipment. The test involves applying a load to the equipment and then monitoring how well it operates. This helps to ensure that the equipment is able to handle the demands of a real-world situation. It is an important part of maintaining and troubleshooting your power generation equipment. It can help to identify potential problems before they cause downtime or damage. WBPS provide both the testing equipment and the expertise to carry out the testing on your premises.

FIND OUT MORE
CHP Generator Relocation

The combination of our experienced engineers and a modern, dedicated transport fleet means that should you require the relocation of an existing generator; we are ready to complete the removal, efficiently and safely.

PARTNERSHIPS

WORKING WITH 2G

2G Logo 2

We are proud to be a distributor of 2G and their industry leading gas engine technology, ranging from around 50kW, all the way through to 1500kW. These engines offer outstanding power in a clean, modular design and are ideal for a wide variety of applications and sectors.

FIND OUT MORE

YOUR SPECIALIST MAINTENANCE TEAM

We have a dedicated team of experts to look after maintenance, as well as engineers, project managers, consultants and logistics coordinators who are all directly employed by us. They put their expertise to work for you, providing high specification equipment that is bespoke to your needs and budget.

CLARE NEWTON Business Development Manager
JOHN WALKER Key Account Manager
MIKE DALE Key Account Manager
RICHARD CARTER Service Operations Director
PHIL HAMBLETT Renewables Operations Director

NEED MORE HELP?

Buying a generator can be a daunting buying process to navigate, especially if it’s not your field of expertise. To give our buyers confidence in their decision and enable them to be more informed when talking to our (or any) sales team, we have put together a number of useful resources which will help you on your journey.

5 REASONS TO INVEST IN A CHP GENERATOR

Investing in a prime CHP generator is usually an excellent decision for businesses who rely heavily on power infrastructure, but also have obligations to remove their emissions with cleaner energy.

VIEW THE ARTICLE HERE
JARGON BUSTER

Tired of all the technical jargon? Not sure what it all means? Read and download our jargon buster document to make sense of all the industry terms.

VIEW THE ARTICLE HERE
WHAT SIZE GENERATOR DO I NEED?

Do you have any idea what size generator you need? There are a lot of factors which need to be considered, before making the desicion. Find out what they are by reading our article.

VIEW THE ARTICLE HERE

DOWNLOADS

GET IN TOUCH