Regular diesel generator maintenance is essential to ensure your equipment remains reliable, efficient and ready to operate when needed. But how do you know when a service is due, particularly if your generator spends most of its time on standby?
Service intervals depend on the generator model, operating hours and manufacturer’s recommendations. Understanding these requirements can help you avoid unexpected breakdowns, unnecessary repairs and potentially costly interruptions to your power supply.
Diesel generators should be serviced according to the manufacturer’s specified running-hour and calendar intervals, whichever comes first. This means a standby generator may need servicing even if it has accumulated very few operating hours.
The following intervals provide a broad guide to maintenance requirements for industrial diesel generators. Actual schedules vary depending on the engine manufacturer, generator model and operating conditions.
| Service interval | Typical maintenance tasks |
|---|---|
| Every 250–500 running hours, or annually | Engine oil and oil filter changes, fuel filter replacement, crankcase breather checks and fluid sampling. |
| Every 500–1,000 running hours, or every two years | Air filter replacement, radiator inspection and cleaning, and checks of alternator and electrical components. |
| Every 1,500–2,000 running hours, or every three years | Coolant replacement, inspection or replacement of belts and hoses, and engine-specific valve clearance checks. |
These are illustrative intervals, not a universal servicing schedule. Generators operating regularly under heavy loads or in demanding environments may require more frequent maintenance.
Always follow the manufacturer’s recommendations for your particular generator, including any additional calendar-based inspections and testing requirements.
A standby generator might only operate a handful of times each year, but that doesn’t mean its components remain in perfect condition between uses.
Diesel fuel can deteriorate during prolonged storage, while batteries gradually lose charge or capacity. Coolant and lubricants can also degrade over time, and seals, hoses and electrical connections may develop problems even when the engine isn’t running.
Without regular inspections, these issues can go unnoticed until a power cut occurs and the generator is expected to start immediately.
This is why standby generators need regular servicing, even if they’ve barely been used.
The work involved in generator servicing and maintenance depends on the equipment, its condition and the manufacturer’s schedule. Routine inspections, scheduled servicing and more extensive maintenance all have different purposes.
Routine checks typically cover visible leaks, fluid levels, battery condition, warning indicators and signs of damage or deterioration.
Scheduled servicing involves the maintenance tasks specified by the manufacturer at the relevant running-hour or calendar interval. It may also include checking starting systems, inspecting electrical connections and assessing the generator’s overall condition.
More extensive maintenance may involve specialist diagnostics, component replacement or repairs identified during inspections and testing.
Depending on the generator’s usage and condition, additional maintenance may include load bank testing to assess performance under electrical load, or fuel polishing to remove contaminants from stored diesel.
A generator might start successfully during a routine test, but that doesn’t necessarily mean it will perform reliably when supplying power to a building or critical equipment.
Load bank testing applies a controlled electrical load to assess how the generator performs under demand. Unlike a no-load test, it allows engineers to check performance at different load levels and identify potential problems before an emergency occurs.
Testing under appropriate loads can also help reduce the risk of wet stacking, where prolonged low-load operation can cause unburnt fuel and deposits to accumulate in the engine’s exhaust system.
Annual load bank testing is often recommended for standby generators, although the appropriate frequency depends on the manufacturer’s recommendations, operating conditions and site requirements.
Rehlko, formerly Kohler Energy, also offers its Conscious Care™ programme for certain KD Series generators. This uses an alternative maintenance approach involving shorter low-load exercise runs and lubricant analysis, reducing the need for conventional monthly loaded testing.
Diesel stored for long periods can deteriorate, particularly if water, dirt or microbial contamination enters the fuel tank. This can lead to blocked filters, poor engine performance and potentially a failure to start when the generator is needed.
Regular fuel inspections and testing help identify contamination before it causes problems. Tank inspections are also important, as water and sediment can accumulate over time, while cold weather may increase the risk of fuel gelling.
Where contamination is identified, diesel generator fuel polishing can help improve fuel quality by removing water, particles and other contaminants through specialist filtration and treatment.
Fuel maintenance should form part of the generator’s overall servicing programme, particularly for standby equipment that may go months without operating.
Some generator maintenance issues are easy to spot, while others may only become apparent during an inspection or when the equipment is needed.
Warning signs include:
These symptoms can indicate problems with the engine, fuel system, battery or other components. Ignoring them could lead to an unexpected breakdown, leaving your site without backup power when it’s needed most.
However, a generator can appear to be working perfectly well and still be overdue for servicing. Always check generator servicing and maintenance records against the manufacturer’s recommended schedule rather than relying on visible warning signs alone.
Some routine generator checks can be carried out by trained site personnel, including checking fluid levels, looking for visible leaks and reviewing warning indicators and maintenance records.
However, tasks such as engine servicing, electrical testing, fault diagnosis and component replacement should be undertaken by suitably qualified engineers. Specialist procedures, including load bank testing and fuel polishing, also require appropriate equipment and expertise.
A planned generator maintenance contract can help ensure servicing takes place at the recommended intervals, with inspections and testing coordinated around your operational requirements. Any additional repairs will depend on the level of cover provided.
If you’re weighing up the options, our guide to whether you need a generator maintenance contract explores the benefits and helps you decide whether it’s right for your site.
If you’re unsure whether your generator is overdue for maintenance, a professional inspection can help establish its condition, identify potential problems and determine what servicing may be required.
Rehlko provides specialist generator maintenance and support for organisations across the UK.
Contact our team to arrange a one-off generator inspection and find out whether your backup power needs attention.